DecalFAQ

Auto Decal Instructions

See video below…

*Get My Business cards is not responsible for any damage caused by improper installation of auto decals*  It is recommended if you haven’t done this before to take it to a professional sign place and have them install it!

Step 1 – Clean the area thoroughly

Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.

Step 2 – Prepare the sticker for application

Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer paper. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.

Step 3 – Peel the white paper backing off

Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.

Step 4 – Lower the sticker onto the surface

Slowly lower the sticker onto the surface with the center first moving outwards towards the edges and rub it in place firmly with a squeegee or credit card.

Step 5 – Slowly peel the clear transfer tape off

Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface you may not have put enough pressure to get it to stick to the surface, so apply more pressure and peel again.

*Use a pin to poke any air bubbles in the center and push the air out through the hole.

*The recommended optimum temperature for applying graphics is 70°F. For best results do not apply a sticker in extreme hot or cold temperatures.

 

*Get My Business cards is not responsible for any damage caused by improper installation of auto decals*  It is recommended if you haven’t done this before to take it to a professional sign place and have them install it!

Pin It on Pinterest